">
Downloads:
Operating & Instructions Manual
IMPORTANT SAFETY INFORMATION ENCLOSED
READ THIS ENTIRE MANUAL PRIOR TO OPERATING TOOL.
FAILURE TO OBSERVE THE FOLLOWING WARNINGS AND INSTRUCTIONS COULD RESULT IN EQUIPMENT DAMAGE, SERIOUS INJURY OR POSSIBLY EVEN DEATH… PUT SAFETY FIRST!
WARNING:
- Always wear appropriate PPE while operating
- Impact powered tools vibrate in use. Vibration and repetitive motion may be harmful to arms and hands. Stop using tool if any discomfort, tingling feeling or other pain Seek medical advice prior to resuming use.
- Always turn off air supply and disconnect supply hose from impact prior to removing, installing or adjusting any component on this tool, or before performing any maintenance on this
- Keep hands, loose clothing and long hair away from thetool in rotational
- Tool will continue to rotate, unengaged, when impact throttle is
- Do not lubricate with flammable or volatile liquids such as kerosene or
- This tool is not insulated against electric
- This tool is not designed for work in explosive atmospheres.
- Anticipate sudden changes in motion during start-up operation of
- This tool can exert strong forces on the
WARNING:
The use of other than originally designed replacement parts may result in safety hazards, decreased tool performance, increased tool maintenance and may void all term warranties.
SRT Manufacturing is not responsible for customer’s modification of tools for applications on which SRT was not consulted. Repairs should only be made by authorized, trained personnel. Consult SRT Manufacturing for assistance.
It is the responsibility of the operator’s employer to place the information in this manual into the hands of the equipment operator.
The only tool that should be used to rotate the StudPuller is a properly inserted drive tool. Any other tools, such as a pipe wrench, will void the warranty and could permanently damage the StudPuller.