It's finally here! A portable, purpose built machine that uses a patented brush system to clean even the dirtiest bolts and pipes - from 3/4" to 3" in diameter - faster, safer and cleaner than ever before. Developed through years of on-site and shop experience, the Shipman Industrial Bolt & Pipe Cleaner offers distinct advantages over traditional cleaning methods. Made in the USA, the Shipman Industrial Bolt & Pipe Cleaner takes the hard work out of a dirty job.
We've all been there. You know, standing in front of a screaming benchtop grinder with a dirty bolt or pipe - the sparks flying and your forearms aching from turning as you slowly erase the rust and sludge left behind by years of heavy use. Finally you finish, ignoring your sore back, stiff hands and raw skin covered with stinging , irritating metal filings. Then you pick up another piece and start all over again.
If this sounds all too familiar, don't worry. You are not alone. Fact is no matter how you approach it, cleaning pipes and bolts has never been an easy job. The good news is that it doesn't have to be that way any longer.
The Shipman Industrial Bolt & Pipe Cleaner takes the hard work out of a dirty job. Simply place any length of pipe or bolt into the machine's powerful chuck and adjust the cleaning wheel diameter. Then flip the conveniently placed switch and guide the variable-speed power-assisted Servo® Drive. That's it. Just watch as the Shipman's patented brush system quickly and easily lifts years of grit and grime from even the dirtiest bolts or pipes and traps them in one small on-board collecting unit. Or connect it to your shop's central vacuum unit. Either way, there are no more bits of sharp metal on your clothes, your skin or in your eyes. You're left with an incredibly clean bolt or pipe that's ready to coat or re-install. All in a fraction of the time it used to take!
Faster. The Shipman's powerful motor, Servo® Drive and variable-speed power-assist cleans bolts and pipe and average of 90% percent faster, increasing productivity and reducing labor costs.
Safer. A shielded housing and automatic shut-off switch ensures the operator's hands never come in contact with the machine's wire brushes, reducing potential accidents and possible down time.
Cleaner. Designed for today's environment consideration, the Shipman Industrial Bolt & Pipe Cleaner effectively "traps" the airborne pollutants normally found during the cleaning process and collects them in one small, easily discarded vacuum chamber. Best of all, it uses no messy chemicals.
At the same time, the Shipman's patented brush system increases surface area contact, providing a cleaner end product. Plus, its durable frame, compact size and locking rolling casters allow you to take your Shipman machine wherever work calls.
Isn't it time for something new? Think about it. Sandblasting leaves scars. Chemicals are messy. And bench grinding takes too long. But the Shipman Industrial Bolt & Pipe Cleaner changes all of that. Designed through years of professional shop and on-site experience, the Shipman is loaded with features that eliminate many of the hassles involved with this traditionally labor-intensive job. Plus its safer and faster. Best of all, each Shipman is manufactured by hand in the USA with rugged steel frames on castors and constructed with top quality parts for years of performance. Shipman even offers replacement brushes. It's simply a machine whose time has come. After just one use, we think you'll agree... the Shipman Industrial Bolt & Pipe Cleaner is one piece of equipment you shouldn't be with out!